An error ocurres when the telescope is shutting down "The Error message was: [CONN-ID: 87271] "DRIVES|2:DOME[0]|2;DOME[1]|2;DOME[2]|2:ERR_DeviceError|timeout reading status|2|DOME[0];ERR_DeviceError|timeout reading status|2|DOME[1];ERR_DeviceError|timeout reading status|2|DOME[2],SYSTEM|7:CABINET|7:ERR_PhaseWatcher|Wrong 3-phase seq./undervoltage|5|CABINET;ERR_UPS|Power failure. system running on UPS battery|1|CABINET;ERR_DeviceError|timeout reading status|2|CABINET,AUXILIARY|0::,UNKNOWN|0::"" . This message is repeated and sen via email to the watchmen (Dennis Stello noticed that he received lots of email pr. minute. Neither me or Stello are watchman for tonight). Looking at the observer page the dome state is still open, this is problematic, since the humidity is high. I tried to activate the shutdown, but it didn't help.
Old comments:
2025-05-14 11:33: [Mads]: A restriction on the number of retries has been implemented and a message that retries failed will be send at the end.
2025-05-13 03:48: [Jonatan Rudrasingam]: Trired to activate shutdown. Didn't work. Added urgently to task.
